Qualcomm QPST Tool Latest Version Free Download
Download >>> https://byltly.com/2tvZLs
Qualcomm QPST Tool: A Powerful Software for Flashing Firmware on Qualcomm Devices
Qualcomm QPST Tool is a suite of Windows software that allows users to flash stock firmware on Qualcomm smartphones and tablets. It is a useful tool for fixing software issues, unbricking devices, or updating to the latest software version. In this article, we will show you how to download and use QPST Tool to flash firmware on your Qualcomm device.
What is QPST Tool?
QPST stands for Qualcomm Product Support Tools. It is a collection of software tools that enable users to configure, monitor, and service Qualcomm-powered devices. QPST Tool includes several components, such as:
QFIL (Qualcomm Flash Image Loader): A tool that allows users to flash stock firmware (XML based) on Qualcomm devices.
QCN Backup and Restore: A tool that allows users to backup and restore the QCN (Qualcomm Calibration Network) file, which contains the IMEI and other network settings of the device.
RF Calibration: A tool that allows users to test and calibrate the RF (Radio Frequency) performance of the device.
Service Programming: A tool that allows users to program various service settings of the device, such as MEID, ESN, SPC, etc.
Software Download: A tool that allows users to download and update the software packages on the device.
How to Download QPST Tool?
QPST Tool is compatible with Windows XP to Windows 11 (x32 or x64 bit). You can download the latest version of QPST Tool from the link below:
QPST Tool - Qualcomm Product Support Tools (QPST)
After downloading the QPST Tool zip file, extract it on your computer. You will see a folder named "QPST" with several files and subfolders inside it. To install QPST Tool, run the "setup.exe" file and follow the on-screen instructions.
How to Use QPST Tool to Flash Firmware on Qualcomm Devices?
To use QPST Tool to flash firmware on your Qualcomm device, you will need the following:
A Qualcomm device with USB debugging enabled.
A USB cable to connect your device to your computer.
A stock firmware file (XML based) for your device model.
A Windows computer with QPST Tool installed.
Once you have everything ready, follow these steps:
Launch QFIL from the QPST folder on your computer.
Select "Flat Build" from the "Select Build Type" menu.
Click on "Browse" under "Select Programmer" and locate the "prog_emmc_firehose_xxxx.mbn" file from the firmware folder. (The xxxx represents the chipset number of your device.)
Click on "Load XML" and select the "rawprogram0.xml" and "patch0.xml" files from the firmware folder.
Connect your device to your computer in EDL mode. (To enter EDL mode, you can either use a special EDL cable or press and hold certain key combinations while connecting your device to your computer.)
Once your device is detected by QFIL, click on "Download" to start flashing the firmware.
Wait for the flashing process to complete. It may take several minutes depending on the size of the firmware file.
Once done, disconnect your device from your computer and reboot it normally.
Congratulations! You have successfully flashed stock firmware on your Qualcomm device using QPST Tool.